How to Assemble Your Motif Aura Glow

1. Make sure that you clean the pump as instructed in this user manual. To avoid any milk leakage, remove any residue around the rim before assembling and make sure all breast pump parts are dry. Wash your hands thoroughly before you assemble the cleaned components.

2. Install the valve in the collection container, paying attention to the direction of installation.

3. Put the silicone diaphragm into the collection container and press down firmly to ensure a perfect seal.

4. To install the breast shield on the collection container, make sure to align the diversion groove on the breast shield with the backflow groove on the collection container and then press the edges with both hands to ensure the seal is in place.

5. Measure your nipple using the included nipple ruler and add 0 - 3 mm to find your nipple size. If a flange insert is needed, choose the appropriate size and press it into the breast shield until it is flush.

6. Attach the milk stopper to the top of the collection container, making sure the stopper is perfectly aligned with the pour spout. Press the plug in firmly to ensure a tight seal and no milk leakage.

7. Install the pump motor on the collection container by aligning the notch under the motor with the silicone diaphragm and pressing down firmly to ensure a complete seal.

Your Motif Aura Glow is fully assembled. Click here for the instructions on how to pump with the Motif Aura Glow.

Download the Motif Aura Glow User Manual here. 

Download the Spanish Motif Aura Glow User Manual here.